Yes, you are going to be able to reinstall the removable bumper cover after you install the Draw-Tite Trailer Hitch Receiver # DT42GR on your 2023 Jeep Grand Cherokee. view full answer...
Yes, it does! The EcoHitch Trailer Hitch item # EH39FR installs entirely behind your 2023 Tesla Model Y's rear bumper. The cover can be reinstalled when you are not using the hitch and be completely concealed.
I have attached a picture along with an installation video so you can see what this hitch looks like once installed.
If you are planning on towing you will also need a wiring harness item # 119250KIT and a ball mount kit item # C45534. view full answer...
Hey Buddy, great question!
You can definitely keep the Classic Accessories Cover # CA80116 installed on your 5th wheel while you're driving - just make sure you secure it to you hitch with the hook and loops straps as well as the hooks to keep it from blowing off in the wind! view full answer...
Yes, it does! The crosstube of the etrailer Hitch item # e25TR installs completely behind the rear bumper cover on your 2024 Subaru Outback so you do have to remove it. The crosstube being hidden is one of the best features of the etrailer hitch. Installing it like this leaves only the 2" receiver exposed. This not only looks better it helps with ground clearance.
I have linked an installation video below along with the instructions so you can see how this hitch gets set up.
If you... view full answer...
More than likely the # C45CR was slightly bent during shipping. This is usually the reason the holes won't line up during installation. Unless it is severely bent (cracks or chipped paint can indicate it is unsafe) you can bend it back and get your hitch installed. You can use a vise, step, or even some boards to bend it back. I have attached an article below which covers all of these methods for your reference. view full answer...
Not sure what year your car is but the Stealth Hitches Hidden Rack item # SH47FR has been confirmed to fit the 2019 - 2024 Volvo V60 including the Polestars. This hitch is by far the best option for someone using a bike rack. It has a 2" receiver so it will work with most of the bike racks on the market.
The receiver on the Stealth Hitches item # SH47FR is completely removeable and the crosstube installs behind the rear bumper cover. These means when you're not transporting your bike... view full answer...
Looks like you're interested in a weight distribution system for your 2023 Subaru Ascent and possibly a hitch compatible with one. I took a look at your owner's manual (page 431) and if you have the factory hitch it isn't rated for one so the only option you have for it is the Curt True Course Advanced Bluetooth Trailer Sway Control - 1 to 4 Axles item # C94VV.
The Curt True Course item # C94VV is an electric sway control system that connects to your Subaru's 7-Way and is controlled by... view full answer...
We have never found any factory wiring on the rear of a 2012 Toyota Tundra that came from the factory with a 4-way flat. I have linked an installation video near the bottom of the page we did on a 2009 that shows a similar setup as yours where we had to run additional Wiring # 5506 to the 7-Way # 37185 so we could install a brake controller # 90195. For your truck to have the cleanest look I recommend using the Redarc # RED52VR that you can mount with the Panel # 331-TPSI-002 into one of... view full answer...
Go To Results